Sometimes, when you try to print from your HP Officejet Pro 8610 printer, it will show an error message on its screen saying, “hp 8610 printer failure.” This error probably occurs due to printhead or cartridge issues. Otherwise, when you use an incompatible ink cartridge on your printer, it may lead to the “Printer Failure” error. So, just follow the below instructions carefully to solve this issue on your HP Officejet Pro 8610 printer.

Reset Your Printer

  • Make sure to turn on your printer.
  • Now, go to the printer’s control panel and press the Home icon.
  • Navigate to the Setup option and select it.
  • Here, tap the Tools option from the list.
  • Scroll down the screen and choose the Restore Factory Defaults option.
  • Tap the Yes button to confirm.
  • Now, the printer will start to restore all the settings to the factory defaults.
  • Once you have completed the restoring process, you will see a message on the printer screen saying, “printer defaults have been restored.”
  • Tap the OK button.
  • Now, print a test page on your printer and check whether the issue is solved.
  • If the printer still shows the error, follow the below instructions.

Clean The Ink Cartridges

  • Ensure to turn on the printer.
  • Open the ink cartridge access door and wait until the carriage stops moving.
  • Push the tab and remove each ink cartridge from the respective slot.
  • If any cartridge is attached with the orange protective tape, remove the tape.
  • Clean the vent at the top of each cartridge.
  • Now, insert all the ink cartridges into the respective slots.
  • Make sure that all the cartridges are installed correctly in their places.
  • Close the ink cartridge access door.
  • Next, check if the “hp 8610 printer failure” error is solved.
  • If the issue continues, follow the steps in the upcoming procedure.

Clean The Printhead

  • First, ensure that your HP printer is turned on.
  • Next, load the plain white sheets into the main input tray.
  • Go to the printer’s control panel and press the Home icon.
  • Search for the Setup option and tap on it.
  • Scroll down the screen and touch Tools from the list.
  • Tap the Clean Printhead option on the printer screen.
  • Now, the cleaning process will take some time to finish.
  • Once your printer completes the printhead cleaning, check if the issue is solved.
  • If it does not work, align the printhead.
  • Press the Home icon on the printer screen.
  • Navigate to the Setup option and select it.
  • Tap Tools from the list.
  • Select the Align Printhead option on the printer screen.
  • Now, check if the “Printer Failure” error message has disappeared. By now, it should have vanished and you must be able to print properly without any issues.

You can fix the “hp 8610 printer failure” issue by following the above instructions. In case you need any clarifications, just use the call option on this page to contact our technical experts.