Hp Officejet Pro 8600 Printer Failure” is a common error that may probably occur due to low or defective ink cartridges, printhead issues, or incompatible ink cartridges that you are using. Usually, this error message will appear on your printer screen when you try to print from your machine. So, if your HP Officejet Pro 8600 printer shows the “Printer Failure” error on its screen, use the troubleshooting methods given on this page to fix it.

Clean The Printhead On Your Printer

  • Turn on your printer, if it is turned off.
  • Load a stack of plain white sheets into the main input tray.
  • Go to the printer’s control panel and press the Home icon.
  • Search for the Setup option and tap on it.
  • Scroll down the screen and touch Tools from the list.
  • Tap the Clean Printhead option on the printer screen.
  • Now, the cleaning process will take some time to finish. So, you’ll have to wait patiently until it is over.
  • Now, check if the “hp officejet pro 8600 printer failure” error is fixed.
  • If the error still appears on the printer screen, align the printhead.
  • Press the Home icon on the printer screen.
  • Navigate to the Setup option and select it.
  • Tap Tools from the list.
  • Select the Align Printhead option on the printer screen.
  • Next, check if the printer shows the failure error message again.
  • If the issue continues, reset your printer by following the below instructions.

Reset The Printer

  • First, check if your printer is turned on. If not, switch it on now.
  • Next, press the Home and Back icons on your printer’s control panel. Again, continuously hit the Home icon two times.
  • Now, you will see the Engineering Menu on the printer screen.
  • Tap the Service Menu option from the list.
  • Go to Reset Menu and tap the OK button. For resolving the hp officejet pro 8600 printer failure issue.
  • Here, navigate to the Full Reset option and tap the OK button on the printer screen.
  • Now, wait for some time. The printer will reset all the settings to the factory defaults.
  • After resetting your printer, check if the issue is solved.
  • If it does not work, check the ink cartridges.

Check The Ink Cartridges

Checking The Estimated Ink Levels

  • Make sure to turn on your printer.
  • Now, go to the control panel of your printer and tap the Ink icon.
  • The estimated ink level of each cartridge will appear on the printer screen.
  • If you see any ink cartridges levels are low or empty, replace them with new ones.
  • In case no ink levels are low, then you are using a defective or incompatible cartridge on your printer. Replace those ink cartridges with new ones for hp 8600 printer failure. .
  • Replacing The Ink Cartridges

    • Confirm that the printer is turned on.
    • Open the ink cartridge access door and wait until the carriage stops moving.
    • Push the tab and remove the defective or incompatible ink cartridge from the respective slot.
    • Unpack a new ink cartridge from the package.
    • Discard the protective tapes from the cartridge.
  • Now, insert the new ink cartridge into the respective slot.
  • Make sure that the cartridge is properly installed in its place.
  • If you want to replace any other defective or incompatible ink cartridges, repeat these instructions.
  • Now, you can close the ink cartridge access door. Next, check if the problem is rectified.
  • You can solve the “Hp Officejet Pro 8600 Printer Failure” issue by following the above instructions. In case you need further clarifications/explanations regarding the above troubleshooting methods, contact our technical experts using the call option on this page.